ESP32-S2-WROOM vs ESP32-WROVER-E

ESP32-S2-WROOM

WROOM · ESP32-S2 · Active

As an affiliate we may earn from qualifying purchases. Prices and availability are set by AliExpress.

ESP32-WROVER-E

WROVER · ESP32 · Active

As an affiliate we may earn from qualifying purchases. Prices and availability are set by AliExpress.

Every figure here is checked against Espressif’s official datasheets. We’ve taken every care to keep it accurate — but datasheets are dense and mistakes happen, so if something looks off, please report it.

Which should you choose?

These run different SoCs (ESP32-S2 vs ESP32), so they differ in CPU, wireless and peripherals — not just packaging.

Choose ESP32-S2-WROOM if you need

native USB-OTG — act as a USB device/host without a USB-UART chip
more usable GPIO (37 vs 24)

Choose ESP32-WROVER-E if you need

Bluetooth LE
2 CPU cores vs 1 — more headroom for RTOS / parallel work
PSRAM for camera frames, audio buffers and LVGL/large displays
larger flash option (up to 16 MB) for bigger firmware and OTA
Ethernet MAC for wired networking (add an external PHY)

Size, to scale

ESP32-S2-WROOM — 18×31 mm
ESP32-WROVER-E — 18×31.4 mm

Spec differences at a glance

CPU: ESP32-S2-WROOM Xtensa LX7, 1-core · ESP32-WROVER-E Xtensa LX6, 2-core
SRAM: ESP32-S2-WROOM 320 KB · ESP32-WROVER-E 520 KB
ROM: ESP32-S2-WROOM 128 KB · ESP32-WROVER-E 448 KB
Flash options: ESP32-S2-WROOM 4 MB · ESP32-WROVER-E 4 / 8 / 16 MB
PSRAM: ESP32-S2-WROOM None · ESP32-WROVER-E 2 / 8 MB (quad)
Co-processor: ESP32-S2-WROOM ULP-RISC-V · ESP32-WROVER-E ULP-FSM
Bluetooth: ESP32-S2-WROOM — · ESP32-WROVER-E BT Classic + BLE
Usable GPIO: ESP32-S2-WROOM 37 · ESP32-WROVER-E 24
ADC: ESP32-S2-WROOM 20× 12-bit · ESP32-WROVER-E 18× 12-bit
USB: ESP32-S2-WROOM USB-OTG · ESP32-WROVER-E USB-Serial(external)
UART / SPI / I²C / I²S: ESP32-S2-WROOM 2 / 2 / 2 / 1 · ESP32-WROVER-E 3 / 2 / 2 / 2
SD/MMC: ESP32-S2-WROOM No · ESP32-WROVER-E Yes
Ethernet MAC: ESP32-S2-WROOM No · ESP32-WROVER-E Yes
Touch: ESP32-S2-WROOM 14 · ESP32-WROVER-E 10
Deep sleep: ESP32-S2-WROOM — µA · ESP32-WROVER-E 10 µA
Dimensions: ESP32-S2-WROOM 18 × 31 × 3.3 mm · ESP32-WROVER-E 18 × 31.4 × 3.3 mm
Pin count: ESP32-S2-WROOM 42 · ESP32-WROVER-E 38
Crypto: ESP32-S2-WROOM AES, SHA, RSA, HMAC, RNG · ESP32-WROVER-E AES, SHA, RSA, RNG
Digital signature: ESP32-S2-WROOM Yes · ESP32-WROVER-E No

Compute & memory

⚑ flag an error

	ESP32-S2-WROOM	ESP32-WROVER-E
CPU≠	Xtensa LX7, 1-core	Xtensa LX6, 2-core
Max clock	240 MHz	240 MHz
SRAM≠	320 KB	520 KB
ROM≠	128 KB	448 KB
Flash options≠	4 MB	4 / 8 / 16 MB
PSRAM≠	None	2 / 8 MB (quad)
Co-processor≠	ULP-RISC-V	ULP-FSM

Wireless

⚑ flag an error

	ESP32-S2-WROOM	ESP32-WROVER-E
Wi-Fi	Wi-Fi 4	Wi-Fi 4
Wi-Fi bands	2.4GHz	2.4GHz
Bluetooth≠	—	BT Classic + BLE
802.15.4 (Thread/Zigbee)	No	No
Antenna	PCB	PCB

Peripherals & I/O

⚑ flag an error

	ESP32-S2-WROOM	ESP32-WROVER-E
Usable GPIO≠	37	24
ADC≠	20× 12-bit	18× 12-bit
USB≠	USB-OTG	USB-Serial(external)
UART / SPI / I²C / I²S≠	2 / 2 / 2 / 1	3 / 2 / 2 / 2
TWAI (CAN)	Yes	Yes
SD/MMC≠	No	Yes
Ethernet MAC≠	No	Yes
Touch≠	14	10

Power

⚑ flag an error

	ESP32-S2-WROOM	ESP32-WROVER-E
Operating voltage	3.0-3.6 V	3.0-3.6 V
Deep sleep≠	— µA	10 µA

Physical

⚑ flag an error

	ESP32-S2-WROOM	ESP32-WROVER-E
Dimensions≠	18 × 31 × 3.3 mm	18 × 31.4 × 3.3 mm
Pin count≠	42	38
Temp range	-40 to 85 °C	-40 to 85 °C
Mounting	SMD castellated	SMD castellated
Lifecycle	Active	Active

Security

⚑ flag an error

	ESP32-S2-WROOM	ESP32-WROVER-E
Secure boot	Yes	Yes
Flash encryption	Yes	Yes
Crypto≠	AES, SHA, RSA, HMAC, RNG	AES, SHA, RSA, RNG
Digital signature≠	Yes	No
TRNG	Yes	Yes